Hot Sales Screen Printing Water Oily Photo Emulsion With Diazo Sensitizer

Screen selection: High mesh mesh is usually used (such as 156-325 mesh) to ensure the fineness of the pattern.

Coating: The water and oil emulsion is evenly coated on the screen, usually using a coater to operate.

Drying: Place the coated wire mesh in a well-ventilated environment to dry naturally, or use drying equipment to accelerate drying.

Exposure: The dried wire mesh is placed in the exposure equipment for UV exposure. The exposure time is adjusted according to the sensitivity of the emulsion and the complexity of the pattern.

Development: After exposure, the silk screen is washed with water to remove the emulsion of the unexposed part and form a pattern.

Stir the emulsion well before use to ensure an even distribution of ingredients.

Avoid exposing the emulsion to high temperatures or ultraviolet light for a long time, so as not to affect its performance.

Clean the screen printing tools in time after use to avoid residues affecting the next use.

Storage conditions: Should be stored in a cool, dry, ventilated environment, avoid high temperature and humidity.

Cleaning: Clean the screen printing tools in time after use to avoid residues affecting the next use.

Through the rational selection and use of Water-Oily Emulsion, it is possible to provide high-quality printing results for screen printing products, while meeting environmental protection and safety requirements.